11 Steps to Spray Paint Your Car Like the Professionals – Automobile Bodywork Paint Repair
You will be surprised to see only how you can spray car paint really can be simple. That doesn’t mean that you go at it and can simply grab a tin of paint. There are some fundamentals you have to know. Both in the preparation and application.
Prepare by assembling all of your items that you are going to need. Any parts that do not need to be sprayed and that can be removed then do so. For other places cover Alloy Wheel Repair Enfield well with paper and masking tape.
You’ll need to examine the car carefully for any rough spots. These will have to be sanded with 300 grit sand paper. It also allows the aerosol car paint to stick better. After you have finished sanding, ensure all of the dust dirt and debris are taken from the vehicle. It’s imperative that the car be absolutely clean.
This will make sure that you get an overall even coating of your colored paint plus helps the paint to stick nicely. When you spray on the primer, be sure you apply light layers and allow for drying in between. How exactly to spray car paint takes a little getting used to.
Now you might be pretty well to the point where you might be around ready to spray on the colour. Before you start with the automobile in either case, make a few practice strokes on an object. Begin the passes with the paint without hesitation, after you’re ready. You may end up with uneven coverage if you hold the spray can or gun in one spot and perhaps the paint will run. Should this happen you’ve got a significant repair job on your had. You’ll most probably have directions regarding how exactly to spray on car paint using the gear or spray cans.
It is up to you whether you need to wet sand between coats of primer and colour paints. Check with someone that is comfortable with how to spray on car paint, or you may want to study this option on the internet
You are down to the finishing touches, once you happen to be absolutely satisfied with the colour. You will now need to apply several coatings that are clear. This can give the gloss and finished look to the automobile along with protect the finish. It’ll be up to you personally although likely two layers will be adequate. Make absolutely sure it truly is dry in between coats.
If you favor once again, you’ve the alternative of wet sanding. Again, I would recommend you request the advice of people which are comfortable with the way to spray paint a car. You need with these grits in this sequence if you decide to follow this measure then. Use 800, 1000, 1200, 1500 and the finally the 2000. This will remove spots that could not be overly light in the clear coating application.
Now you’ll desire to using a rubbing compound to buff the surface in order to use a 2000 grit to remove any scrapes.
You should buff the surface. To do this just use a medium cut polish.
As a final touch, you may want to apply a number of layers of wax.